Beer Filling Line
All machines are integrated into the Beer production line.
Beer Complete Line
Beer is one of the oldest and most widely consumed malted alcoholic and non-alcoholic beverages in the world. Beer is brewed from starch sources (i.e) Cereal grain. Beer is brewed from basically malted Barley /Wheat/Rice/Maize/Corn/millet/ etc along with water, hops, and or yeast.
There are two Challenges to producing Beer bottling.
1- Beer filling in a container (Can, Glass, and PET bottle)
2- Brewhouse (Processing)
To fill Beer: We have created a special competitive advantage for customers according to their needs to produce beer in PET, CAN, and GLASS packaging.
Here, If you plan to have a production line for filling beer, we offer fully automatic machines in this industry in different packages.
– Glass Bottle / Aluminum Can / PET Bottle
Beer in Glass
We offer solutions for a complete Beer filling & packaging line for containers, NRGB (Non-Returnable Glass Bottles) and RGB (Returnable Glass Bottles) speed ranging
- NRGB: 8,000 to 60,000 bph
- RGB: 8,000 to 60,000 bph
The offering of complete Glass line solutions through one point of contact is by equipment from us and our technical partners. All engineering services viz layout designing, in-house testing, project management, Installation & Commissioning, Production establishment, Operational training, technical services and spare parts supply from one point of contact by RAPID throughout life operation cycle.
From A-Z machines made by Youngsun.
-Bottle washer
-Bottle Filler & crowner
-OPP Labeling machine or sleeve label machine
-Palletizing
If you want to have beer in Glass bottle packaging, refer to Glass bottle Filling Line.
Beer in Aluminium CAN
Capacity: Up to 90,000 bph
If you want to have beer in Aluminum can packaging, refer to Can Filling Line.
Can in 200ml to 350 milliliters are suitable to fill Beer products. from A-Z machines made by Youngsun.
-Depalletizer
-Filler & seamer
-Shrink wrapper
-Palletizing
Beer in PET Bottle
Capacity: Up to 60,000 bph
If you want to have beer in PET bottle packaging, refer to PET Filling Line.
PET Bottle in 250ml to 2.5 liters are suitable to fill Beer and Malt drink products. from A-Z machines make by Youngsun.
-Blow molding-Filling-Capping Combi block
-labeler machine and Palletizing
Video
Beer Can Filling Line
Capacity: 36,000 bph
watch the video >>
Video
Beer Glass Bottle Filling Line
Capacity: 40,000 bph
watch the video >>
Video
Beer Filling Line For Glass Bottles
Capacity:50,000 bph
watch the video >>
Beer and its sensitive character for bottling
Everyone has tried to pour a bottle of beer into a glass. The challenge is always the foam from the beer, which tends to foam over and the beer cannot simply be poured into the glass.
-When bottling beer, many factors need to be taken into account so that the beer is not only bottled cleanly, but also with very little oxygen in the bottle, so that the taste of the beer is preserved for a long time without the quality deteriorating due to oxidation in the bottle. The oxygen in the beer bottle leads to a loss of quality and the taste stability of the beer changes, and also beer loses its typical aroma, and the character of the beer will be completely lost. Apart from that, the beer also loses its microbiological stability in the bottle. This can lead to the product deteriorating and even gashing will be a big problem later by consumers.
-Because of all these problems which make beer very sensitive, our engineers and brewmasters by YOUNGSUN manufactured beer filling machines with special features and modern technology specifically for beer, so that the oxygen content in each beer bottle remains almost zero after filling and no additional oxygen can enter the bottle during filling.
But that’s not all that a beer filling machine has to do, after finished filling it has to be cleaned properly, so every pipe and all corners and edges of the filling machine have to be cleaned thoroughly and hygienically so that no Mold formation or bacteria can grow there and cause no problems during later beer filling process.
Other factors such as bottle rinsing and water consumption during rinsing process as well as CO2 consumption during the filling process are very important criteria in our today’s world, firstly to reduce production costs for producers and secondly to keep our climate as neutral as possible.
These important factors led our engineers and brewmasters to design our filling machines under German standards with all of these properties and modern German technology as we developed our filling machines for beer and beer mixed drink.
YOUNGSUN as a manufacturer and supplier of a complete bottling line for beer and beer mixed drinks in glass or PET or can from a single source supplier will be happy to have your request.
If you would like to know more about our special beer bottling technology, please send us your inquiry to: sales@youngsunme.com
Our brewmaster and engineers are always at your disposal and look forward to your inquiry.